Repair local crack, hole, or similar damage with the Concrete Sealing Systems. This sealing system can be further used for pipe connections, holes (diameter < 20 cm), or similar unsealed areas.
Structure of the Concrete Sealing System:
Preparation:
The surface shall be solid, clean, dry, and free of any hydrocarbon residuals.
Sealing:
For each application, a dew point distance of 3°C must be observed.
Paste Sealing:
The paste sealing is a 2-component epoxy-based resin and a special additive which adjusts the viscosity of the paste. The viscosity must be adjusted up to the application, size, and shape of the sealed area. The sealing paste is anti-static so it can be used in areas where electric conductivity is required. For application use trowel, spatula, or similar.
Installation note:
The above information is based on tests by approved institutes (e.g. TÜV Süd Germany) and many years of experience. As the lining performance depends on correct installation, we offer application courses for certified installers and installation supervisors and provide certificates which shall be renewed every 3 years.
