Euromant®

Innovation meets knowledge! Your advantages with our technologies:

Safe

Providing a risk-free environment for both, mankind and our world is what all our products are made and developed for.

Easy To Use

The simple usage of technologies make a difference. Our products are customer friendly and provide easy access and fast application times.

Optimized

Constant improvement makes the difference between a good or a smart choice. Optimization is perfect for you, but also for our environment.

Efficient

Our nature in striving for the best brought us to the current state as trusted, high performance technology supplier for global companies.

The Euromant® concrete lining system is an external application to rehabilitate the ring wall directly on-site without interruption of site service ensuring business continuity. It is of particular interest to seal the ring wall of storage tanks.

The ring wall on the outside of the tank is sealed between the concrete base and the steel shell of the tank in the way that corrosion of the steel, degradation of the concrete and water propagation below the tank can be avoided.

The Euromant® coating system has especially been developed to seal this area which is exposed to the high mechanical load and to harsh environmental conditions. The system consists of adhesion primers, sealing material, and a UV protective final layer.

Structure of the lining system:

Euromant Lining System on Concrete

Preliminary Works:

  • Surface treatment, cleaning, degassing, remove all oil residuals
  • High-pressure water jet or sandblasting (SA 2,5)
  • Repairing the surface and leveling of weldings with epoxy mortar

Coating Application Technology:

  • Ground layer application with a roller:
  • For concrete subsurface (can be sanded for better adhesion): Adaflex Primer®
  • For steel subsurface: Adagrund®
  • Application of Euromant® layer on concrete and steel surfaces
  • Application of the conductive/antistatic layer Adaflex® by rolling on concrete and steel surfaces

Installation note:

The above information is based on tests by approved institutes (e.g. TÜV Süd Germany) and many years of experience. As the lining performance depends on correct installation, we offer application courses for certified installers and installation supervisors and provide certificates which shall be renewed every 3 years.

Downloads

Tank Lining Systems: Frequently Asked Questions

Structural tank lining systems start from a thickness of 0,5mm up to 4mm. These thick film systems can maintain their function even if the substrate below looses their function e.g. steel below is fully corroded due to pit corrosion.
Yes, they can have different important properties such reach a crack bridging effect up to 300% of elongation and they can have a high loadability and resist to water, seal concrete/steel concjunctions etc.
There are structural linings which are glassfiber reinforced such as Adapox DSF or Epoflex Laminate and others which are not glass fiber reinforced such as Epoflex 590.
They can be applied in above ground tanks, underground tanks, concrete surfaces in contact with chemicals, water, food etc.
Depending on the system we propose grit blasting, water blasting or a surface preparationg with TCR Rust Convertter
A vacuum intersticial space is created and 24/7 monitored by a vacuum leak detection system. It consists of a primary and secondary containment.

Get Your Euromant® Quotation!

Similar Products

Euromant®